Equipos diseñados para poder realizar trabajos de inspección y mantenimiento de estructuras en negativo (inspección de puentes, viaductos, cuerpos de presa, muelles portuarios, etc.)
DATOS BÁSICOS PASARELA PEMP-N
150
160
Length of walkway unextended
9 m
10 m
Extended walkway length
15 m
16 m
Alcance máximo vertical negativo
7.6 m
7.6 m
Carga máxima de pasarela (14 m)
500 kg
300 kg
Carga máxima de pasarela (15 m)
250 kg
150 kg
Longitud máxima de acera a superar
2,7 m
2,7 m
Altura máxima de barrera de seguridad vial a superar
3.5 m
3,5 m
Maximum permitted wind speed
12.5 m/s
12.5 m/s
Gangway slewing angle
180°
180°
La pasarela elevadora de personal PEMP-N 150 tienen un alcance máximo horizontal bajo tablero de 15 metros y un alcance máximo vertical en negativo de 7,6 metros. El modelo de pasarela PEMP-N 150 posee una capacidad de carga en la plataforma de 500 kg. Pudiendo ubicar 250 kg. en el extremo de la misma totalmente desplegada
La pasarela elevadora de personal PEMP-N 160 tienen un alcance máximo horizontal bajo tablero de 16 metros y un alcance máximo vertical en negativo de 7,6 metros. El modelo 160, aumenta la longitud de alcance en negativo 1 metro. Pero reduce la capacidad de carga total a 300 kg, y 150 kg en el extremo de la pasarela.
The stabilisation system consists of a rolling stabiliser located on the right-hand side of the vehicle, which allows the truck to move at a constant speed along the bridge or viaduct with personnel on board the working walkway, thereby increasing work productivity. The vehicle can move along the track with the walkway deployed (in the working position). Speed: 10 m/min.
The truck cab is fitted with a video camera system installed within it, which allows the working platform to be viewed in real time. Likewise, the MEWP-N has a radio intercommunication system between the working platform and the vehicle cab. In this way, the operator in the truck cab and the operatives on the working platform are in continuous communication while carrying out these tasks and during intermediate movements of the MEWP-N.
* Included in models 150/160 and 170/190. The 70L/S model only has radio.
Generador de corriente eléctrica de 10 kVA de potencia con tomas de 220 V y 380 V para facilitar a los operarios los trabajos de mantenimiento a realizar con grupos de soldadura o herramienta eléctrica.
* Included in PEMP-N 150/160 – 170/190 model
The vehicle incorporates a 950 l/min hydraulic compressor with a 10.5 bar pressure air intake, to facilitate maintenance and repair work for operators using pneumatic tools or spray guns to paint the structure of the bridge or viaduct, port dock, etc. *Included in model PEMP-N 150/160 – 170/190
Lighting system for night work or work in low visibility conditions on the work walkway, the vertical turret, the operator access ladder to the work walkway and underneath the vehicle to increase safety during the work to be carried out.
* Included in PEMP-N 150/160 – 170/190 model
Inside the walkway we will position a manual scaffold with the capacity to lift one person (120 kg) up to a height of 2.0 m above the walkway floor (up to a working height of 4.0 metres), which allows personnel access to the interior of the spaces between the bridge deck beams.
* Included in PEMP-N 150/160 – 170/190 model
Para realizar la solicitud de servicio es necesario rellenar el formulario de la "Ficha Técnica de pedido PEMP-N" que aparece más arriba y enviarla escaneada a transgruma@transgruma.com
If you would like information about any of our services, please feel free to contact us by filling out the form below or via our telephone or email.
